6 Facts About Everyone Thinks Are True

Undergoung Utilities and their Standard Colors

Underground utilities can easily be identified today. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Today, the risks have been lessened although not completely eliminated. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. The worst thing that can happen if lines are not identified is that fatal injuries can happen. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

But, despite the marks, there will sill be accidents. It is said that every 6 minutes, there is a utility line that is struck. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. This is then something that affects public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. When locating utility lines underground, this machine makes it easy to do so. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

There are certain colors that mark different utility lines for easy identification. The colors below indicate the kind of utility uses it.

Proposed excavation sites use white lines. Area that will be excavated in the future are marked.

Pink lines are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Electric power lines, cable, conduit, and lighting cable use red lines. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Green lines are used for sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.

If you want to learn more about utility lines click here now! View here for more.